Serving the Kennewick area  ·  (509) 591-0547  ·  Open Mon-Sun 7am-7pm
📞 (509) 591-0547 Free Quote

Metal Roofing in Burbank, WA (99323) · Local Professionals

Kennewick Metal Roofing · Fast response in Burbank and the Kennewick area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (509) 591-0547
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Burbank is a small town where the Snake River meets the Columbia, and most homes and farm buildings here are single-story ranches and shops with low-pitched roofs. The dry, windy summers and cold winters take a toll on shingles and fasteners, especially on properties near the Snake River and along Highway 12.

Homeowners in Burbank (99323) call Kennewick Metal Roofing because we understand the local conditions: exposed-fastener metal roofs are common on farm buildings and small homes here, and we know how to handle the screw replacement and re-fastening that keeps them watertight. We are based in Kennewick and serve Burbank and the surrounding area, and we are fully insured for your peace of mind.

Metal Roofing in Burbank (99323)

Burbank sits in the Columbia Basin, where the ground is sandy silt and basalt ridges, and the wind blows dust and grit across roofs. Many properties here are small homes and farm buildings near the Snake River, with low-pitched roofs that are prone to wind uplift and fastener back-out. The dry summers bake shingles, and the winter cold brings snow, ice, and freezing fog that can cause ice damming at the eaves. Range fires in the dry hills can throw embers onto roofs, so metal roofing is a smart choice for fire resistance and durability.

Our team has worked on metal roofs throughout Burbank and the Kennewick area. We know the local building stock and the specific challenges of installing and repairing metal roofs in this climate. Whether you need a new standing seam roof on your home or screw replacement on a farm shop, we have the experience to do it right.

Our services in Burbank

How a Job Works in Burbank

Step 1: Call us at (509) 591-0547 or fill out our contact form to schedule a free on-site assessment. We will inspect your roof, discuss your options, and provide a written estimate. We will also check with the local building department about permit requirements, since rules vary by jurisdiction.

Step 2: Once you approve the estimate, we schedule the work. For Burbank properties, access can be tight on smaller lots or farm roads, so we plan accordingly. We handle permit applications and coordinate with any HOA or historic district design review if needed. Our crew is experienced with exposed-fastener systems and standing seam, and we use quality materials and proper fastening techniques to withstand local winds.

Step 3: After the work is done, we clean up the site thoroughly, removing all debris and materials. We walk through the finished job with you to make sure you are satisfied. We leave your property clean and your roof ready for the seasons ahead.

Pricing for metal roofing in Burbank depends on the size of your roof, the material, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. We also offer free estimates for storm and wind damage repair and metal roof inspections. Call us at (509) 591-0547 to get a precise quote for your Burbank property.

My farm shop near the Snake River has exposed-fastener metal roofing with screws backing out. Can you fix that?
Yes, we specialize in screw replacement and re-fastening for exposed-fastener metal roofs. The wind and temperature swings in Burbank often cause screws to loosen over time. We replace the screws with proper sealing washers and ensure they are driven to the correct torque to prevent leaks and future back-out.
A windstorm just peeled back some panels on my roof in Burbank. How quickly can you respond?
We offer free inspections for storm and wind damage. Call us at (509) 591-0547, and we will schedule a visit as soon as possible to assess the damage and make temporary repairs if needed, then provide a permanent fix.
What does a typical metal roof replacement cost for a small ranch home in Burbank?
For a small ranch home, metal roof replacement typically starts around $9 per square foot, but the total depends on roof size, pitch, and material choice. We provide free estimates so you get an accurate number for your specific property.
Do I need a permit to replace my roof in Burbank, and can you help with that?
Roofing permits are commonly required for a full replacement, and requirements vary by jurisdiction. We can guide you through the process and coordinate with the local building department to ensure your project meets all codes.
My neighbor and I share a property line, and I want to make sure my new metal roof doesn't cause drainage issues. What should I do?
We can assess your roof design and gutter placement to direct water away from the property line. If you are in an HOA, we can also help coordinate approval for the roof profile and color to avoid conflicts.
Are you fully insured for roofing work in Burbank?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the project.
How often should I inspect my metal roof in Burbank to prevent problems?
We recommend an annual inspection, especially after winter and wind seasons. Check for loose screws, damaged panels, and debris buildup. Our free inspection service can catch small issues before they become leaks.

Nearby service areas

📍 Kennewick 99336📍 Pasco 99336📍 Richland 99352📍 West Richland 99353
Why choose us?

Trusted professionals in Kennewick

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Kennewick

All your work handled by qualified professionals in Kennewick

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Kennewick

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Kennewick

“We had a detached shop out back that needed a real roof on it, and these guys put up corrugated panels across the whole thing in about a day and a half. Crew of three, super tidy, and they swept the driveway before they left. Way less hassle than I expected.”

Metal Roof Installation
Jennifer M.
⭐⭐⭐⭐⭐
JM
Jennifer M.
Richland

“Our brick entry porch had old shingles that were curling up, and I didn't want a full tear-off. They retrofitted metal panels right over the top and it looks like a whole new house. The flashing around the porch posts is clean and tight, no gaps anywhere.”

Metal Roof Over Shingles (Retrofit)
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Benton City

“Honestly I just needed someone to look at the roof on the shed out by our little vineyard and they found a couple of loose panels and resealed a seam that had been letting water in. Fair price for a small job, which is hard to find. Took them maybe two hours.”

Metal Roof Repair
Emily C.
⭐⭐⭐⭐
EC
Emily C.
West Richland

“Standing seam on our ranch house, about 2,400 square feet. The crew was professional, kept the site clean, and the charcoal finish looks sharp. Only thing is they ran a couple days past the original estimate, but they kept me informed the whole time. Overall really happy with how it turned out.”

Standing Seam Metal Roofing
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Burbank

“We had water coming in right where the metal roof meets the chimney, and I was worried it was going to be a huge deal. They got up there, redid the flashing around the chimney and resealed it in one afternoon. No leaks since, even after that big rain last month.”

Chimney & Skylight Repair
Lisa H.
⭐⭐⭐⭐⭐
LH
Lisa H.
Prosser

“Tore off the old metal and put on a brand new ribbed panel roof on our house, they had the whole thing done in three days with a crew of four. What really got me was the cleanup, they even ran a magnet over the yard for screws. You'd never know they'd been here.”

Metal Roof Replacement
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Walla Walla

“Instead of replacing our metal roof we had them coat and repaint it, and I'm so glad we did. The faded gray panels came out looking almost new, and it cost a fraction of a replacement. The crew was respectful and finished right on schedule.”

Metal Roof Coating & Painting
Mike J.
⭐⭐⭐⭐
MJ
Mike J.
Mesa

“We swapped our old red tile roof for stone-coated steel and it kept the exact same look from the street. The installers matched the color to the original tiles really well. Small gripe, they didn't haul off all the old material the first day, but it was gone by the end of the week. Would use them again.”

Stone-Coated Steel Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Kennewick · Response within 24h · No commitment · ☎ (509) 591-0547

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Kennewick ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm