Serving the Kennewick area  ·  (509) 591-0547  ·  Open Mon-Sun 7am-7pm
📞 (509) 591-0547 Free Quote

Metal Roofing in Mesa, WA (99330) · Local Professionals

Kennewick Metal Roofing · Fast response in Mesa and the Kennewick area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mesa is a small farm town in the Columbia Basin, and the roofs here take a beating. Most homes and shops around town sit on flat lots with low-pitched roofs, and the dry sandy silt and basalt ridges mean wind and dust are constant. If you live near Mesa Elementary or along Highway 17, you know how fast a spring gust can peel back a shingle or lift a panel edge.

That's why folks in Mesa (99330) call Kennewick Metal Roofing. We're based in Kennewick, just a short drive away, and we've worked on plenty of corrugated and ribbed panel roofs on farm shops and ranch homes out here. When your roof starts leaking or you're ready to upgrade, we give you a straight answer and a free estimate.

Metal Roofing in Mesa (99330)

Mesa sits in the heart of the Basin, surrounded by irrigated fields and dry sagebrush hills. The ground is mostly sandy silt, which drains fast but can shift under a heavy roof if the framing isn't up to it. Many properties here are single-story ranch homes and farm shops with low-pitch roofs, and the wind that sweeps across the open fields can work screws loose and lift panel edges over time. In summer, the sun bakes shingles until they crack, and in winter, freezing fog and occasional snow can create ice dams at the eaves. Range fires in the dry hills are a real concern too, and embers can land on a roof and start a fire. That's why more Mesa homeowners are choosing metal, especially corrugated and ribbed panels that shed heat and wind and hold up to ember exposure.

Our team has been serving Mesa and the surrounding Kennewick area for years. We understand the local building stock, from older ranch homes to newer shops, and we know what works here. Whether you need a full replacement or just a repair, we'll help you pick a roofing system that fits your building and your budget.

Our services in Mesa

How a Job Works in Mesa

Step 1: You call us at (509) 591-0547 or fill out our contact form. We'll schedule a free on-site assessment at your property in Mesa. We'll look at your current roof, check for leaks, loose fasteners, or storm damage, and talk through your options. We'll also check for any permit requirements with the local building department, since rules can vary.

Step 2: Once you approve the estimate, we schedule the work. For many Mesa jobs, that means coordinating with the property owner on access, especially on tight lots or where equipment needs to get around farm buildings. We handle the permit paperwork and make sure the job site is safe. If your home is in an HOA or historic district, we'll help you get the necessary approvals for panel profile and color.

Step 3: After the work is done, we clean up thoroughly. We haul away old materials, sweep the site, and do a final walkthrough with you to make sure you're happy. We leave your property clean and your roof ready for the next storm.

Pricing for metal roofing in Mesa depends on the size and condition of your roof, access, and the material you choose. For a typical ranch home, corrugated and ribbed panel roofing starts around $5.50 per square foot, while standing seam runs about $10 per square foot. Metal roof repair starts at $450, and screw replacement or re-fastening starts at $750. If you're considering a full replacement, expect around $9 per square foot, and metal roof over shingles (retrofit) starts at $7 per square foot. We also offer free estimates, so call (509) 591-0547 to get a precise quote for your Mesa property.

My farm shop near the Mesa wheat fields has corrugated panels that are coming loose. Can you fix that?
Yes, we handle screw replacement and re-fastening for corrugated and ribbed panel roofs all the time. The constant wind out here can back out screws and enlarge the holes, so we replace the fasteners with larger, neoprene-washered screws and check the panels for any damage. We'll also inspect the framing to make sure it's holding.
A windstorm just peeled back part of my roof. How fast can you get out to Mesa for emergency repairs?
We prioritize storm damage calls in Mesa and the surrounding area. Call us at (509) 591-0547 and we'll schedule the soonest available inspection, often within a day or two. We'll tarp any active leaks and give you a written estimate for the repairs.
What's the typical cost to replace a shingle roof with metal on a 1,500 square foot home in Mesa?
For a 1,500 square foot ranch home, a basic corrugated panel roof might run around $8,250 to $12,000, depending on pitch, access, and whether we need to remove the old shingles. Standing seam would be higher, roughly $15,000 and up. We provide free estimates so you can get exact numbers for your property.
Do I need a permit to replace my roof in Mesa, and who handles it?
Yes, roofing permits are typically required for a full replacement or re-roof in Mesa. The exact requirements and fees are set by the local building department, and we'll verify them before we start. We can pull the permit for you and coordinate the inspections.
My neighbor's tree branches hang over my roof. Can I trim them, or do I need to talk to them first?
In Washington, you generally have the right to trim branches that cross your property line, but it's best to talk with your neighbor first to keep things friendly. If the branches are causing damage or are dead, you may need to address it. For HOA properties, check your CC&Rs for any rules about landscaping and roof maintenance.
Are you fully insured for roofing work at my Mesa property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Mesa's climate?
Metal roofs are low maintenance, but in Mesa's dusty, windy environment, we recommend an annual inspection to check for loose screws, debris buildup, and any signs of wear. After a big dust storm or wind event, it's smart to have us take a look. We also offer coating and painting services to extend the life of your roof.
Why choose us?

Trusted professionals in Kennewick

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Kennewick

All your work handled by qualified professionals in Kennewick

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Kennewick

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Kennewick · Response within 24h · No commitment · ☎ (509) 591-0547

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Kennewick ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm