Serving the Kennewick area  ·  (509) 591-0547  ·  Open Mon-Sun 7am-7pm
📞 (509) 591-0547 Free Quote

Metal Roofing in Connell, WA (99326) · Local Professionals

Kennewick Metal Roofing · Fast response in Connell and the Kennewick area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Connell is a small agricultural city in Franklin County, and its housing stock reflects that: modest single-story ranches and farmhouses from the 1940s through the 1970s, many with low-pitched shingle roofs that take a beating from the wind and sun. Lots are wide and flat, often with room for a shop or barn, and the terrain is open wheat country with basalt ridges nearby, so roofs are fully exposed to the elements. If you live near Connell Park or along the Highway 395 corridor, you know how fast a spring gust can peel back a loose shingle or send a dust storm across a roof.

That is why homeowners and property managers in Connell (99326) call Kennewick Metal Roofing. We understand the specific challenges of roofing here: wind-lifted panels, failed fasteners, and the need for materials that can handle temperature swings from 100-degree summers to freezing winters. We are based in Kennewick and serve Connell and the surrounding areas, bringing metal roofing expertise directly to your property.

Metal Roofing in Connell (99326)

Connell sits in the heart of wheat country, where properties often include a main house plus a shop, garage, or barn, all with roofs that face constant wind and sun. The ground is mostly flat with well-drained sandy silt, but that also means water can pool quickly during a heavy rain if gutters and flashing are not right. Many homes have low-slope roofs where shingles wear out fast, and the wind that sweeps across the open fields can lift edges and work screws loose over time. We see a lot of corrugated and ribbed panel roofs on agricultural buildings here, and we know how to install them to handle the local wind loads. Access is usually straightforward on these wide lots, but we always check for overhead power lines and tight spots around additions or outbuildings.

Our team has years of experience serving Connell and the Kennewick area, from simple repairs to full metal roof installations. We know the local building department and what it takes to get a permit for a re-roof, and we can help you choose a metal roofing system that fits your home and your budget.

Our services in Connell

How a Job Works in Connell

Step 1: You call us at (509) 591-0547 or request a free estimate online. We schedule a time to come out to your Connell property, inspect your current roof, and discuss your options. We will check for damage, measure the roof, and talk through metal roofing styles, colors, and any repair needs. You get a written estimate before any work begins.

Step 2: Once you approve the estimate, we handle the permitting with the City of Connell and schedule the work. On installation day, our crew arrives with materials and gets to work. If your property has a tight driveway or you need coordination with a tenant or family member, we will plan around that. We keep the site organized and protect your landscaping as much as possible.

Step 3: After the work is done, we do a thorough cleanup, haul away old materials, and walk the roof with you to make sure you are satisfied. We do not leave until you have had a chance to ask questions and see the finished job.

Metal roofing in Connell is priced by the square foot, and the final cost depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. For a typical ranch home, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind that code limits how many layers you can have. Repairs like leak fixes start at $450, and screw replacement starts at $750. For agricultural buildings or commercial properties, we offer free estimates. The best way to get an accurate number is to call us at (509) 591-0547 for a free on-site assessment. We will give you a clear, no-pressure estimate.

My house is near Connell Park and the roof is original from the 1960s. Is it worth switching to metal?
Absolutely. Many homes around Connell Park and the older parts of town have shingle roofs that are at the end of their life. Metal roofing lasts decades longer, handles the wind and heat better, and can lower your energy bills. We can inspect your roof and tell you if a retrofit over the existing shingles is possible or if a full replacement is the better path.
A windstorm just lifted some panels on my barn. How quickly can you respond?
We prioritize storm damage calls in Connell and the surrounding area. Call us at (509) 591-0547 and we will schedule an inspection as soon as possible, often within a day or two. We can tarp or secure the roof temporarily if needed and then give you a repair estimate.
What does a metal roof cost for a typical 1,500-square-foot ranch in Connell?
For a 1,500-square-foot ranch with a simple gable roof, you are looking at roughly $12,000 to $15,000 for installation, depending on the material and any repairs needed. Standing seam will be on the higher end. We provide free estimates so you can get an exact price for your home.
Do I need a permit from the City of Connell to replace my roof?
Yes, most full roof replacements require a permit from the City of Connell. The exact requirements and fees can vary, so we always check with the local building department before starting work. We handle the permitting process for you as part of the job.
My neighbor's tree branches hang over my roof. Can I trim them, and does the HOA have a say?
In Connell, property line rules typically allow you to trim branches that overhang your property, but it is best to talk with your neighbor first. If you are in an HOA, check the covenants for any restrictions on roofing materials or colors before you choose a metal roof. We can help you understand what is allowed and provide documentation for HOA approval.
Are you fully insured for work on my Connell property?
Yes, Kennewick Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Connell?
We recommend an inspection every two to three years, especially after a big windstorm or before winter. The wind and temperature swings here can loosen fasteners and seals over time. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Kennewick

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Kennewick

All your work handled by qualified professionals in Kennewick

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Kennewick

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Kennewick · Response within 24h · No commitment · ☎ (509) 591-0547

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Kennewick ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm