Serving the Kennewick area  ·  (509) 591-0547  ·  Open Mon-Sun 7am-7pm
📞 (509) 591-0547 Free Quote

Metal Roofing in Prosser, WA (99350) · Local Professionals

Kennewick Metal Roofing · Fast response in Prosser and the Kennewick area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Prosser is wine country with a roofing problem: older homes and ag buildings around the Yakima River corridor take a beating from sun, wind, and the occasional ember from a range fire. If you live near the Prosser Wine Country Inn or off Old Inland Empire Highway, you already know the drill.

We're Kennewick Metal Roofing, and we serve Prosser (99350) because we know this town's mix of 1940s cottages, vineyard outbuildings, and newer commercial shops. When your shingles start curling or a seam opens up, call us at (509) 591-0547 for a straight answer and a free estimate.

Metal Roofing in Prosser (99350)

Prosser sits where the Yakima River meets the dry hills, and that means two things for roofs: intense sun that bakes asphalt shingles until they crack, and spring winds that funnel down the valley and lift edges. The housing stock here includes a lot of mid-century single-story ranches with low-pitch roofs, plus older commercial and agricultural buildings near downtown and the fairgrounds. Many of those roofs have three layers of shingles or more, which limits what you can do without a full tear-off. We also see a fair number of metal roofs on winery buildings and barns that need re-fastening or leak repair after 15 or 20 years. Our team has worked on everything from corrugated panel roofs on fruit packing sheds to standing seam on newer homes near the golf course. We know how to handle the tight lots and gravel drives that are common off Bennett Avenue and in the older neighborhoods.

We've been serving Prosser and the surrounding Yakima Valley for years, and we understand the local building department's permit process for re-roofs and the inspection requirements that come with it. We also know which panel profiles and colors tend to pass muster with the few HOAs in the area.

Our services in Prosser

How a Job Works in Prosser

Step 1: You call (509) 591-0547 or fill out our contact form. We schedule a free on-site assessment at your Prosser property, usually within a couple of days. We'll walk the roof, check for active leaks, failed fasteners, and flashing issues, and then give you a written estimate with options. No pressure, no sales pitch.

Step 2: Once you approve, we pull the permit if needed (Prosser requires permits for full replacements, and we handle that paperwork). On the day of the job, our crew arrives with materials and a plan for your specific lot. If you're in a tight spot off Wine Country Road or have a steep gravel drive, we'll coordinate delivery and staging so we don't block neighbors. For commercial or ag buildings, we work around your schedule, including early mornings or weekends if that helps.

Step 3: When we're done, we do a full cleanup, including magnet sweeping for nails, and walk the job with you. We don't leave until you're satisfied and we've shown you the finished work. We also provide documentation for insurance claims if storm damage was involved.

Pricing in Prosser depends on the job. For a typical 1,500-square-foot ranch, metal roof installation starts around $8 per square foot, so you're looking at roughly $12,000 for the basic install. Standing seam runs about $10 per square foot, and replacement (tear-off and new metal) starts at $9. If you want to go over existing shingles with a retrofit, that's from $7 per square foot, but only if your roof has one layer and the deck is solid. Repair jobs start at $450 for leaks and minor fixes, and screw replacement or re-fastening starts at $750. For commercial or agricultural buildings, we give free estimates because the variables are bigger. Factors that affect price include roof size, pitch, access (tight lots cost more), the condition of the decking, and urgency. Call us at (509) 591-0547 for a free estimate tailored to your Prosser property.

My Prosser ranch house has three layers of shingles. Can you install metal over them?
Probably not. Most building codes limit re-roofs to two layers, and three layers usually means a full tear-off is required. We'll check the layers and deck condition during our free inspection and tell you exactly what the code allows in Prosser.
A windstorm just peeled back panels on my barn off Old Inland Empire Highway. How fast can you get out?
We prioritize storm damage calls in Prosser and the surrounding area. Call (509) 591-0547 and we'll schedule an inspection, usually within 24 to 48 hours, and can often do temporary repairs the same day to prevent further water damage.
What does a metal roof repair cost in Prosser for a typical leak?
Most leak repairs start at $450, but the final price depends on the source (flashing, fastener, seam) and access. We give you a firm quote after inspecting the roof, so you know the cost before we start.
Do I need a permit for a metal roof in Prosser, and how long does it take?
Yes, the City of Prosser requires a permit for roof replacements and some repairs. We handle the application and inspection coordination. Turnaround is typically a few business days, but we always confirm current requirements with the city before scheduling.
My neighbor's tree branches hang over my roof. Can I trim them, and will my HOA care about the metal roof color?
In Washington, you can trim branches that cross your property line, but you can't damage the tree. For HOA rules, check your covenants first. We can provide color samples and documentation to help with HOA approval, and we've worked with several HOAs in the Prosser area.
Are you fully insured for work on my Prosser property?
Yes, we carry general liability insurance and workers' compensation coverage for all employees.
How often should I inspect my metal roof in Prosser to prevent problems?
We recommend a quick visual check each spring and fall, looking for loose fasteners, debris in valleys, and any signs of rust or sealant wear. Because of the intense sun and wind here, a professional inspection every 3 to 5 years is smart, especially on older agricultural buildings.
Why choose us?

Trusted professionals in Kennewick

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Kennewick

All your work handled by qualified professionals in Kennewick

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Kennewick

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Kennewick · Response within 24h · No commitment · ☎ (509) 591-0547

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Kennewick ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm