Serving the Kennewick area  ·  (509) 591-0547  ·  Open Mon-Sun 7am-7pm
📞 (509) 591-0547 Free Quote

Metal Roofing in Sunnyside, WA (98930) · Local Professionals

Kennewick Metal Roofing · Fast response in Sunnyside and the Kennewick area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sunnyside is a farming town where the roofs take a beating. The Yakima Valley sun bakes shingles, spring winds blow grit off the fields, and a lot of the homes and outbuildings around downtown and the older neighborhoods still have exposed-fastener metal roofs that are decades old. If your roof is leaking, rattling, or just looking tired, we can help.

Kennewick Metal Roofing is based just down the road in Kennewick, and we serve Sunnyside and the surrounding Yakima Valley area. We know the housing stock here: 1940s to 1960s single-story ranches, farmhouses with low-pitch roofs, and agricultural buildings that need tough, practical metal roofing. Whether you are near Central Park or out by the Sunnyside High School, we can get your roof back in shape. Call us at (509) 591-0547 for a free estimate.

Metal Roofing in Sunnyside (98930)

Sunnyside sits in the heart of the Yakima Valley, where the ground is a mix of sandy silt and clay, and irrigation is a way of life. That means a lot of older homes and farm buildings have metal roofs that were installed with exposed fasteners. Those screws back out over time, the washers dry rot, and leaks show up at the seams and penetrations. The low-slope roofs common on ranches and sheds here are especially prone to ice damming in winter when snow melts and refreezes at the eaves. And with the summer heat regularly topping 100 degrees, metal roofs expand and contract, which can loosen fasteners and open up gaps. We have seen it all in Sunnyside, from the older homes near the downtown commercial district to the farm buildings out on the valley floor.

Our team has been working on metal roofs in the Tri-Cities and Yakima Valley for years. We understand the local conditions and the building styles, and we know how to fix problems so they stay fixed. Whether you need a repair on an old barn roof or a new standing seam roof on your house, we have the experience to do it right.

Our services in Sunnyside

How a Job Works in Sunnyside

Step 1: Give us a call at (509) 591-0547 or fill out our contact form. We will set up a free on-site assessment at your property in Sunnyside. We will look at the roof, check for leaks, loose fasteners, and damage, and talk with you about what you need. We will also check for any permit requirements with the city of Sunnyside, since a full replacement usually needs one.

Step 2: Once you approve the estimate, we schedule the work. Our crew arrives on time and gets to work. We know that Sunnyside properties can have tight access, especially in older neighborhoods or on farm sites with equipment around. We plan ahead for that. If your home is in a historic district or has HOA rules, we will help you navigate the approval process. We also pull the necessary permits and coordinate inspections.

Step 3: When the job is done, we clean up thoroughly. We haul away all old materials and leave your property as clean as we found it. We do a final walkthrough with you to make sure you are happy with the work. We do not consider a job finished until you are satisfied.

Pricing for metal roofing in Sunnyside depends on the size of your roof, the material you choose, and the condition of the existing roof. For a basic metal roof installation, prices start at $8 per square foot. Standing seam metal roofing starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you want to go over your existing shingles with a retrofit, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof coating and painting starting at $2.50 per square foot, which is a cost-effective way to extend the life of an older metal roof. For a free estimate tailored to your Sunnyside property, call us at (509) 591-0547.

My old barn near the Sunnyside canal has a metal roof with exposed fasteners that leak. Can you fix it?
Yes, we specialize in repairing exposed-fastener metal roofs common on farm buildings in the Yakima Valley. We will replace the old screws with new ones that have neoprene washers, reseal the seams, and fix any flashing issues. If the panels are too far gone, we can also install a new metal roof over the existing structure.
A windstorm just peeled back some panels on my roof in Sunnyside. How fast can you get here?
We offer free inspections for storm and wind damage and can usually get to you within a day or two. Call us at (509) 591-0547 to schedule an inspection. We will secure the roof to prevent further damage and give you a repair estimate.
What is the typical cost to replace a metal roof on a 1,500 square foot ranch house in Sunnyside?
For a basic metal roof replacement, you are looking at around $9 per square foot, so for 1,500 square feet, that would be roughly $13,500. But the actual cost depends on the pitch, accessibility, and whether any decking needs repair. We provide free estimates so you can get an accurate number.
Do I need a permit to replace my roof in Sunnyside?
Yes, the city of Sunnyside typically requires a permit for a full roof replacement. The requirements can vary, so we always check with the city building department before starting work. We handle the permit application and inspections for you.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust the roof design and gutter placement to direct water away from the property line. If you have an HOA, we can also help you get approval for the roof style and color. We will work with you to avoid any neighbor disputes.
Are you fully insured for roofing work in Sunnyside?
Yes, we carry general liability insurance and workers' compensation coverage. Your property and our crew are protected.
How often should I have my metal roof inspected in Sunnyside?
We recommend an inspection every two to three years, especially after big storms or if your roof is over 15 years old. The summer heat and winter freeze-thaw cycles can take a toll. We offer free estimates for inspections, so call us at (509) 591-0547 to schedule one.
Why choose us?

Trusted professionals in Kennewick

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Kennewick

All your work handled by qualified professionals in Kennewick

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Kennewick

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Kennewick · Response within 24h · No commitment · ☎ (509) 591-0547

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Kennewick ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm